Do not forget that aquarium fish are the same pets as dogs with cats. Like other pets, fish should have their own feeding place. Inexperienced aquarists are confident that the inhabitants of an artificial reservoir are indifferent to how and where to eat. But, if we consider the food through the feeder, it becomes clear that this method has many advantages. So, the fish get used to the place and time of feeding. The creation of a regime favorably affects the health of the inhabitants. p> What is the use of feeders?
Feeder for fish is a kind of discipline. Feeding will be associated with only one place. Thanks to this, it is possible to improve the condition of the water in the aquarium, since the remains will settle only in one place, which will allow them to be removed from the aquarium or collected. Somams do not have to scour around the ground in search of food, he will know exactly where to find the treasured delicacy. Minimal distribution of food in the aquarium prevents rotting, and therefore the water stays clean longer. p>
Feeding trough for live food greatly facilitates the process of feeding. The fact is that the particles of such food are heavier than water and are rapidly falling downward, therefore sluggish fish or those who cannot eat from the bottom do not have enough time to enjoy live food. Due to the correctly chosen feeding trough, the particles linger in it, which will allow the fishes to slowly eat all the proposed feed. p> Variety of models
Today in the pet store you can find a huge range of different feeders for the aquarium. But if you do not want to spend money, you can build a simple structure yourself. All models can be divided into floating and automatic. p>
If you decide to purchase a floating option, then it is more convenient to purchase a model with suction cups. Such feeders are attached to the wall, which will not allow the fish to move it, and the pump to carry it away. The most common plastic frames, in the middle of which is poured food. But if you still do not know where the place of supply will be located, then you can choose a regular model without mounts. p>
Pay attention to the feed for live feed. In appearance, it looks like a cone, on the sharp end of which is a grid. The cone is conveniently located under water, so changing the height of the water does not affect the convenience either. All the worms remain in the cone until the fish themselves grab them. If you remove the grate from the bottom, you can use it as a regular feeder for different types of food. Fixed feeder on one of the walls of the aquarium is not convenient because of the natural lowering of the water level. If the aquarium feeder is fixed on one side, then after the level change, the feeder will tilt and stop performing its functions. Manufacturers have thought it through, so you can meet modern floating models with guides that help it adjust to the water level. p>
Prefer automatic feeders advise people who: p> Often on business trips or travels; Contain a large number of aquariums.
The automatic fish feeder is attached to the upper edge of the side wall. It is a jar with an engine. On the timer, set the time when the feed will go to the pets. As soon as the time comes to the appointed - the box automatically throws a portion. Since the amount of food varies depending on the type and number of inhabitants, the feeder is equipped with a quantity regulator. For a start, you have to spend a lot of time to adjust the optimal amount. Remember that in no case should the food sink to the bottom and rot, no matter how hungry the fish look, you should limit their diet. p>
The automatic feeder is ideal as the main power source, but you shouldn’t let it go. After all, she is able to dose only dry food, and the fish need a balanced diet. Give the fish a live or vegetable supplement. p>
Install the feeder in the opposite direction from the filter and the compressor. If you put it in the same corner, the feed will simply be washed out of the feeder by a stream of water. So, the fish will remain hungry, and the food will spread in all directions. p> How to make a feeder yourself?
Not everyone wants to buy a feeder, because it can be made by hand. For its manufacture can be used: p> Plastic, Polyfoam, Rubber tube, Plexiglas.
Making a foam feeder is easiest. Even a child can cope with this task. Find a small piece of foam that will be between 1 and 1.5 centimeters high. Decide on the optimal length and width of the feeding area and cut out the frame from the foam. It is advisable to go around the edges of fine sandpaper to remove excess. This trough has significant advantages: excellent buoyancy, ease of construction and low cost. However, it was not without its drawbacks - a short-lived construction that easily absorbs odor and dirt. p>
Make the feeder out of the rubber tube even easier. It suffices to find a suitable tube with a diameter of 1 centimeter and glue the hollow ends together. It is important to do this very carefully, because if water is poured into it, the ring will sink. Such a feeder is not afraid of mechanical damage and will last a long time. p>
For live food it is better to use plastic and plexiglass. Take a piece of material up to 2 mm high. Make a frame of four strips, gluing them perpendicular to each other. In the middle, place a piece of plastic with drilled holes and firmly glue to the prepared frame. p>
Of course, the aesthetic side of homemade feeders remains in question. In addition, the cost of them in pet stores is not so great as to waste time on self-procurement of the necessary attribute. p>
Formal styling short hair with their hands
Directional microphones to listen into your own hands
How to make a homemade rocket
Souvenirs with your own hands netprint