Warning: Invalid argument supplied for foreach() in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 19

Warning: array_diff(): Argument #2 is not an array in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 29

Warning: Invalid argument supplied for foreach() in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 19

Warning: array_diff(): Argument #1 is not an array in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 29

Warning: Invalid argument supplied for foreach() in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 19

Warning: array_diff(): Argument #1 is not an array in /var/www/kartinki1/data/www/3.1onega.ru/ftrans/proxy.php on line 29
Billiards with his hands

Billiards with his hands

Date: 18.10.2018, 20:42 / View: 92355

Game field

The playing field of the billiard table from the edges of the rubber should consist of two squares in proportions and have a “foot” dimension.

dimensions of the billiard table playing field dimensions

playing field design playing field dimensions

playing field design playing field design

billiard table dimensions playing field dimensions

Gluing rubber.

It is better to glue rubber with Nairit, or Glue 88 (SA, NP), which is intended for gluing metal, rubber, fabrics, leather, wood, plastics and other non-porous materials. You can also use S9 Super.

The glue should not stick rubber too much. Problems will arise when replacing rubber (this can happen in a year - depending on rubber, operation and its depreciation) - wood is damaged and it is very difficult to remove the remaining pieces of rubber.

You can glue the "moment", but not transparent, it badly glues, the usual yellow-brown moment. Having smeared wood and rubber once, we wait 5-7 minutes for it to dry, then for the second time only rubber and wait another 5 minutes, then glue the rubber, pressing it tightly.

Pools for the pool.

The entrance to the pocket:

Corner pockets - 114 mm + -1.6

Central - 127 mm + -1.6

In this case, the measurement of the mouth of pockets is carried out by the “gate method” (gate method), and not by the traditional measure method between the ends of the rubber. The Gate Method provides a pocket measurement based on the true action of the ball entering the mouth of the pocket.

pocket size

Using two new striped balls, place the balls at the mouth of the pocket with the stripes in one line so that each ball touches the vertical descent of the rubber, and the line passing through the corners of the cut of both sides passes through the strips of the balls.

In a properly marked loop, the balls will simply touch each other. Deviation + - 1.6mm is allowed.

Horizontal corners of pockets.

141 degrees + -1 for a corner hole

100 degrees + -1 for the central pocket

The vertical angle of cutting rubber within the mouth of the pocket in all pockets should be between 12 and 15 degrees.

rubber slice within the mouth of the pocket  rubber cut within the mouth of the pocket

Specification of the European Federation of Luzny Billiards.

Corner hole: the entrance to the hole is 135-145 mm, the heel (the point where the rubber ends and the bead tree begins) is 110-120 mm, the depth of the shelf is 35-40 mm.

Central pocket: the entrance to the pocket is 125-135 mm, the heel is 105-115 mm, the depth of the shelf is 5-10 mm.

It is necessary to take into account the thickness of a piece of rubber (2-3mm), it is possible and 5mm, it is pasted on a diagonal cut after sawing.

Pockets can be made of two types: closed and open. The latter is not much more expensive, but easy to install. Closed pockets make it possible to apply the system of ball slopes to a single place and eliminate the pulling of balls from the nets. And open "quieter." The ball does not roll inside the table, banging around the corners. When installing a closed pocket between the board and plastic, glue a piece of soft rubber for a better shock absorption. If you really want to save money, you can build an arc of leather and rubber and edging the upper joint with a silicone furniture edge, neatly cut in half. The lip of the pocket, also, before wrapping the bead, is glued with rubber.

how to glue a hole how to glue the hole

Weaving the mesh pockets is not at all difficult; it is better to take a soft rope so that the knots are neat and small:

netting for a pocket

Return...


Related news:


How to make a cake out of cheese


Content parser: contentSearchYahoo |
Total Parsers:1
ReCache | DelPage
Memory used: 227.48KB of 2.25MB
Render time: 6.175 sec., Version: 3.5.5